2003-07 Accord v6 M/T ecu adapter kit for using an 07-08 Acura TL v6 M/T with CanBus Adapter. Adapter is built using M22759/16-22 spec wire no TXL wire is used. All connections are crimped and NOT soldered. Solder can be considered one of the weakest points in any wiring project as it can crack and cause intermittent signal issues.
 
My design will feature a crimp style header to allow for future serviceability in case the inevitable happens and a wire breaks. Because of the placement of the ECU this may or may not happen. If it does a simple re crimp will fix the issue. Where as with the potted design once/if a wire break occurs, then you will not be able to serviced.  For those who do not know what potting is, potting is essentially created a mold/housing around the pins, that will be soldered. Once all the pins are soldered the mould is then filled with epoxy resin which hardens. Securing the soldered pins/wire in place. Which help against vibration and solder breaking. But if the wire breaks your screwed because you can no longer access the ends of the wire in the resin.
 
What is included in the kit:
1 x Ecu Adapter
1 x CanBus Adapter